Basic Operation; Operation Panel - Canon W6400 Series Service Manual

Chapter 1

1.6 Basic Operation

1.6.1 Operation Panel

This section describes the function of the buttons and the meaning of the LEDs on the operation panel.
1) [Power] button
This button is used to turn the printer on and off.
When the power is off: Pressing this buttons turns on the power.
When the power is on: Holding down this button for about 1 or more seconds turns off the power.
2) [Online] button
This button switches between online status, offline status, and menu display.
Online status: This button switches to offline status.
Offline status: This button switches to menu display.
Menu display: This button cancels the menu operation and switches to online status. Also, when maintenance card error is displayed, the printer can be
switched online by temporarily resetting the error. When any other error message is displayed or media is not loaded, however, the printer does not switch
to online status until the problem is resolved.
Job processing: This button switches to the pause status and pauses processing of the job.
3) [Paper Source] button
Online status / Offline status / Menu display: This button switches the paper source between roll media and cut sheets. However, the printer status cannot
be switched while the upper cover is opened.
4) [OK] button
When setting values are displayed: This button sets or executes the selected value or operation.
5) [Information] button
This button displays a submenu. The submenu shows ink and maintenance cartridge, media, head height, head life and parts life information. "Head
Cleaning A" is performed when it is pressed for at least 3 seconds.
6) [Stop/Eject] button
Online status / Offline status / Menu display: Holding down this button for 1 second or longer aborts the job in progress or ink drying and then discharges
the media.
Pause status: Holding down this button for 1 seconds or longer aborts the paused job and discharges the media.
7) button
Offline status: Holding down this button for 1 second or longer moves the carriage to the center of platen.
When a menu is displayed: This button functions as a selector button and is used to display the next option. This button functions as a selector button and
displays the previous item/setting.
8) button
Offline status: When roll media is loaded, this button functions as a manual feed button and feeds the media.
When a menu is displayed: This button is used to go to the next lower-level menu.
9) button
Offline status: When roll media is loaded, this button functions as a manual feed button and reverse-feeds the media. When a cut sheet is loaded, the sheet
is discharged.
When a menu is displayed: This button is used to return to the next higher-level menu.
10) button
Offline status: Holding down this button for 1 second or longer moves the carriage to the center of platen.
When a menu is displayed: This button functions as a selector button and is used to display the next option. This button functions as a selector button and
displays the next item/setting.
11) DATA lamp
Flashing: When the printer is printing, this lamp indicates that the printer is receiving or processing a job. When the printer is idle, it indicates that there
is a paused job, the printer is receiving a job that cannot be processed, or is receiving firmware data.
Off: This indicates that there are no jobs.
12) Message lamp
On: This indicates that a warning is displayed.
Flashing: This indicates that there is an error or the printer is in service mode.
Off: This indicates that operation is normal.
1-10
Button
4
9
Information
Data
Message
Cleaning
(3sec)
Stop/Eject
3
7
8
11
10
12
5
Power
Data
1
Message
13
Online
Offline
Menu
2 14
6
F-1-13
Lamp
Information Power
Cleaning
(3sec)
Stop/Eject Online
15
Offline
Menu
16
0008-6310