Points To Note On Disassembly And Reassembly; Note On Assemblies (Or Units) Prohibited From Disassembly; Moving The Carriage Manually; Units Requiring Draining Of Ink - Canon imagePROGRAF iPF5000 Series Service Manual

4.3 Points to Note on Disassembly and Reassembly

4.3.1 Note on assemblies (or units) prohibited from disassembly

Assemblies that are prohibited from disassembly and their adjustment outside the factory cannot be conducted are indicated by red screws.

4.3.2 Moving the carriage manually

Move the carriage as required during disassembly/reassembly to prevent the carriage form contacting the parts to be removed.
The carriage does not move when capped. When uncapping moving the carriage, refer to the procedures in DISASSEMBLY/REASSEMBLY>Points to Note on
Disassembly and Reassembly>Opening the Caps and Moving the Wiper Unit.

4.3.3 Units requiring draining of ink

When disassembling the following units of the ink passage, drain ink complateil to prevent it from leaking. For how to drain ink, refer to DISASSEMBLY/REAS-
SEMBLY > Pointe to Note on Disassembly and Reassembly > Draining the Ink.
[1] Carriage unit
Refer to DISASSEMBLY/REASSEMBLY > Pointsto Note on Disassembly and Reassembly > Carriage Unit.
[2] Ink tank unit
Refer to DISASSEMBLY/REASSEMBLY > Point to Note on Disassembly and Reassembly > Ink Tank Unit.
Printer
Automatic ink draining
Open top cover
Output tray unit
Left/right circle cover
Tank cover
Left cover
Left front cover
Right upper cover
Operation panel
Mist filter
Filter cover
Lower rear cover
F-4-5
F-4-6
Right cover
Upper front cover
Lower front cover
Manual ink draining
Move carriage onto platen
Ink tube holder
Joint base
Cutter unit
Cutter lifter unit
Support plate
Ink tank unit
Ink tank unit
Chapter 4
0012-6349
0012-6350
0012-6351
4-3