When installing the right upper cover, make sure that it does not cut the harness connected to the rear of the operation panel.
e) Right cover
When removing the right cover, first remove the lids on the right side cover, right upper cover and right cover, then remove the screws on the right side.
Next, remove the entire right cover by pulling in an upward motion while pressing on the bottom and left side surfaces.
f) Front cover
Remove the front cover by disengaging the two hooks on the bottom of the cover, and then slide the cover to the right and pull forward hooks at three
locations at the top.
Because the cover must be moved to the right, it will be necessary to first remove the right bottom cover and open the maintenance cartridge cover.
Right upper cover