When removing the side covers, first remove the name plate located at the center of the side covers by pushing them upward and removing the two screws

they reveal.

Then remove the side covers themselves by pushing them downward.

c) Operation panel

When removing the operation panel, first open the upper cover. Then insert your hand inside the upper right cover from the left, unhook two hooks securing

the operation panel and push it toward your side, and pull out the inserts at three locations on the upper side. Remove the two connectors connecting the

cable connected to the rear of the operation panel.

d) Right upper cover

When removing the right upper cover, first open the upper cover, then remove the operation panel, lids of right side cover, right side cover and screw at

the front. Next, pull the right upper cover toward your side and remove the entire right upper cover by sliding it downward while holding it's left upper

corner upward.

Name plate

F-4-7

Side cover

F-4-8

Operation panel

F-4-9

Chapter 4

4-5

Table of Contents