Display L2Vpn Service-Instance - H3C S6800 Series Command Reference Manual

Field
Aging
Related commands
reset l2vpn mac-address

display l2vpn service-instance

Use display l2vpn service-instance to display information about Ethernet service instances.
Syntax
display l2vpn service-instance [ interface interface-type interface-number [ service-instance
instance-id ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a Layer 2 Ethernet interface or Layer 2
aggregate interface by its interface type and number. If you do not specify an interface, the command
displays Ethernet service instance information for all Layer 2 Ethernet interfaces and Layer 2
aggregate interfaces.
service-instance instance-id: Specifies an Ethernet service instance by its ID, in the range of 1 to
4096. If you do not specify an Ethernet service instance, the command displays information about all
Ethernet service instances on the specified interface.
verbose: Displays detailed information about Ethernet service instances. If you do not specify this
keyword, the command displays brief information about Ethernet service instances.
Examples
# Display brief information about all Ethernet service instances.
<Sysname> display l2vpn service-instance
Total number of service-instances: 4, 4 up, 0 down
Total number of ACs: 4, 4 up, 0 down
Interface
FGE1/0/3
FGE1/0/3
FGE1/0/3
FGE1/0/3
Table 4 Command output
Field
Total number of ACs
Description
Entry aging state:
•
Aging.
•
NotAging.
SrvID Owner
1 vsi10
2 vsi11
3 vsi12
4 vsi13
Description
Total number of attachment circuits (ACs) and the number of ACs in each state
(up or down).
6
LinkID State Type
1 Up VSI
1 Up VSI
1 Up VSI
1 Up VSI