Intermec MobileLAN 21 Series System Manual page 81

5. Click Submit Changes to save your changes. To activate your changes, from the
menu bar click Save/Discard Changes and then click Save Changes and Reboot. For
help, see "Saving Configuration Changes" in Chapter 1.
The following table describes frame subtype filters and their values.
Subtype Value
DIX-IP-TCP-Port Port value in hexadecimal.
DIX-IP-UDP-Port Port value in hexadecimal.
DIX-IP-Protocol Protocol number in hexadecimal.
DIX-IPX-Socket Socket value in hexadecimal.
DIX-EtherType Specify the registered DIX type in hexadecimal.
SNAP-IP-TCP-Port Port value in hexadecimal.
SNAP-IP-UDP-Port Port value in hexadecimal.
SNAP-IP-Protocol Port value in hexadecimal.
SNAP-IPX-Socket Socket value in hexadecimal.
SNAP-EtherType SNAP type in hexadecimal. To filter on both SNAP type and OUI, use
advanced filters.
802.3-IPX-Socket Socket value in hexadecimal.
802.2-IPX-Socket Socket value in hexadecimal.
802.2-SAP 802.2 SAP in hexadecimal.
Configuring the Ethernet Network
3
3-19