About the 2100 Universal The UAP has five LEDs that are identified in Access Point the following illustration. The 2100 Universal Access Point™ (UAP) is a transparent bridge that enables your wireless Wireless #1 Wired LAN end devices to communicate with devices on...
2. Connect the UAP to a power supply. screen appears. 3. To use the UAP as an access point or point- 5. Type the default password Intermec and to-point bridge, connect the UAP to the press Enter. The Configuration menu Ethernet network.
You can mount the UAP to a wall or beam using temperature (+32°F to +122°F) an Intermec mounting bracket kit. Contact your With heater -20°C to +50°C Intermec representative to order one of the kits: option (-4°F to +122°F) • Mounting bracket kit (Part No. 068918) With heater -30°C to 0°C...