Intermec 2102 Mounting & Installation
Cubicle bracket instruction sheet
Hide thumbs
Also See for 2102:
- User manual (15 pages) ,
- Mounting & installation (14 pages) ,
- Quick start manual (2 pages)
Advertisement
Quick Links
2102 Cubicle Bracket Instruction Sheet
This instruction sheet explains how to mount the 2102 Universal
™
Access Point
(UAP) using the 2102 cubicle bracket kit (Part No.
070366). You use the 2102 cubicle bracket in combination with the
mounting bracket that ships with the UAP.
To mount the UAP using the cubicle bracket
1. Position the cubicle bracket above the mounting bracket as
shown. Slide the cubicle bracket down until it seats in the
mounting bracket.
Cubicle
bracket
Mounting
bracket
2102I006.eps
2. Hang the cubicle bracket over the top of a cubicle wall. Adjust the
bracket so it fits securely and then tighten the adjustment knob.
Adjustment
knob
2102 Cubicle Bracket Instruction Sheet
This instruction sheet explains how to mount the 2102 Universal
™
Access Point
(UAP) using the 2102 cubicle bracket kit (Part No.
070366). You use the 2102 cubicle bracket in combination with the
mounting bracket that ships with the UAP.
To mount the UAP using the cubicle bracket
1. Position the cubicle bracket above the mounting bracket as
shown. Slide the cubicle bracket down until it seats in the
mounting bracket.
Cubicle
bracket
Mounting
bracket
2. Hang the cubicle bracket over the top of a cubicle wall. Adjust the
bracket so it fits securely and then tighten the adjustment knob.
Adjustment
knob
2102I006.eps
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Intermec 2102
Summary of Contents for Intermec 2102
- Page 1 ™ Access Point (UAP) using the 2102 cubicle bracket kit (Part No. 070366). You use the 2102 cubicle bracket in combination with the mounting bracket that ships with the UAP. To mount the UAP using the cubicle bracket 1. Position the cubicle bracket above the mounting bracket as shown.
- Page 2 4. While holding the brackets in place, slide the UAP up slightly and then press on the base of the UAP until it clicks into the clip on the base of the mounting bracket. You have completed the installation of the 2102 cubicle bracket. Part No. 070440-001 *070440-001* *070440-001* 2102G007.eps...
Need help?
Do you have a question about the 2102 and is the answer not in the manual?
Questions and answers