Intermec MobileLAN 21 Series System Manual page 197

Managing, Troubleshooting, and Upgrading the 21XX
To upgrade the access point software
1. Start the utility.
2. In the Upgrade File Location field, enter the path and filename of the upgrade file
(AP*WEB.BIN) or click Browse to find the file. For example, AP170WEB.BIN.
3. Click Start. The utility must remain active until the upgrade procedure is complete;
do not close the utility.
4. Configure the root access point to retrieve the software.
a. From the Actions menu, click Configure Access Point and then enter the IP
address of the root access point. A Web browser session is established.
b. From the menu bar, click Distributed Network Upgrade. The Distributed
Network Upgrade screen appears.
7
7-25