Intermec MobileLAN 21 Series System Manual page 201

Managing, Troubleshooting, and Upgrading the 21XX
To upgrade a 2101, 2100, or 2102
1. At the service prompt (service>), type
appears. Scroll up until you see a section similar to the following:
Startup Segment: This startup = 1,
Data Segment: This startup = 3,
2. Identify the active startup and data segments for this startup—these are the current
segments. In this example, the active startup segment is 1, and the active data
segment is 3.
3. Erase the inactive startup and data segments. In this example, the inactive startup
segment is 2, and the inactive data segment is 4.
a. To erase segment 2, type
is erased.
b. To erase segment 4, type
is erased.
4. Copy the startup files to the inactive startup segment.
a. Type and press Enter. A series of Cs appears on your screen.
fx 2
b. As the Cs are appearing, send the UAP.DNL file using YMODEM protocol to
the access point. A P appears when the transfer is complete.
For example, if you are using HyperTerminal, click Transfer and then click
Send File. The Send File dialog box appears.
In the Filename field, click Browse and navigate to STARTUP\UAP.DNL. In
the Protocol field, click the Protocol down arrow and choose Ymodem. Click
Send.
c. Type and press Enter. A series of Cs appears on your screen.
fx 2
d. As the Cs are appearing, send the UAPBOOT.DNL file using YMODEM
protocol to the access point. A P appears when the transfer is complete.
and press Enter. The file directory
fd
Next startup = 1
Next startup = 3
and press Enter. A P appears when the segment
fe 2
and press Enter. A P appears when the segment
fe 4
7
7-29