Intermec MobileLAN 21 Series System Manual page 152

MobileLAN access 21XX System Manual
9. Click the down arrow on the right side of the Secondary LAN Flooding field and
10. Click Submit Changes to save your changes. To activate your changes, from the
To configure the station radio (in the point-to-point bridge on the secondary LAN)
1. From the main menu, click the link corresponding to the radio that you are
2. Click Wireless Bridging. The Wireless Bridging screen appears.
3. Click the down arrow on the right side of the Node Type field and choose Station.
4. (OpenAir) Identify all the master radios with which this station can communicate.
5. From the main menu, click Spanning Tree Settings. The Spanning Tree Settings
6. In the Root Priority field, enter 0 or another number lower than the root priority that
7. In the Secondary LAN Bridge Priority field, enter a number higher that the bridge
8. Click the down arrow on the right side of the Secondary LAN Flooding field and
9. Click Submit Changes to save your changes. To activate your changes, from the
5-30
choose Disabled.
menu bar click Save/Discard Changes and then click Save Changes and Reboot. For
help, see "Saving Configuration Changes" in Chapter 1.
configuring.
Wireless hops are automatically disabled. Click Submit changes to save your
changes.
a. From the Wireless Bridging menu, click Master List. The Master List screen
appears.
b. In the Channel and Subchannel fields, enter the channel and subchannel of all
the master radios with which this station can communicate.
c. Click Submit Changes to save your changes.
screen appears.
is set in the master radio in the access point on the primary LAN.
priority that is set in the master radio in the access point on the primary LAN.
choose Enabled.
menu bar click Save/Discard Changes and then click Save Changes and Reboot. For
help, see "Saving Configuration Changes" in Chapter 1.