Intermec MobileLAN 21 Series System Manual page 77

Frame Type Filters Screen
2. In each frame type field, click the down arrow on the right side of the Action field
3. Click Submit Changes to save your changes. To activate your changes, from the
4. If you set the Scope field to Unlisted for any of the frame types, you must also
and set the action to Pass or Drop.
In each frame type field, click the down arrow on the right side of the Scope field
and set the scope to Unlisted or All.
For help, see the next table.
menu bar click Save/Discard Changes and then click Save Changes and Reboot. For
help, see "Saving Configuration Changes" in Chapter 1.
configure predefined subtype filters or customizable subtype filters. For help, see
"Using Predefined Subtype Filters" or "Customizing Subtype Filters" later in this
section.
Configuring the Ethernet Network
3
3-15