Intermec MobileLAN 21 Series System Manual page 169

Note: Currently, you cannot use this 802.1x authentication over wireless hops.
Note: Since 802.1x authentication uses rotating WEP keys that are automatically
generated, you do not configure IEEE 802.11b Radio WEP or IEEE 802.11a Radio
WEP. You only configure these parameters if you are using static WEP keys.
To configure MobileLAN secure
1. From the main menu, click Security and then click 802.1x. The 802.1x screen
appears.
2. If 802.1x Authentication is disabled, click the down arrow on the right side of the
802.1x Authentication field and then choose Enabled. Click Submit Changes.
3. Configure the parameters for 802.1x authentication. For help, see the next table.
4. Click Submit Changes to save your changes. To activate your changes, from the
menu bar click Save/Discard Changes and then click Save Changes and Reboot. For
help, see "Saving Configuration Changes" in Chapter 1.
Setting Up Security
6
6-11