Intermec MobileLAN 21 Series System Manual page 218

MobileLAN access 21XX System Manual
FDEL Command (continued)
Note: When you use the FDEL command, the file is marked as invalid and remains in
the file system. To reclaim the file space, you must erase the entire segment. Use the FE
command to erase a segment.
FE
Purpose: Erases the files in a particular segment. To recover the files after they have been erased,
you must reload them from another source.
Note: You must execute this command before you execute a TFTP transfer.
Syntax:
FE s
where s is the name or number of the segment to be erased. You can enter
of a segment name or number if you want to erase all segments.
Example: To erase the contents of segment 1, enter:
FE 1
To erase the contents of the inactive boot segment, enter:
FE IB:
FFR
Purpose: Runs a program
Syntax:
FFR f ( s )
where:
f
s
Example: To run program UAPBOOT.PRG from segment 1, enter:
FFR UAPBOOT.PRG 1
FI
Purpose: Reinitializes the access point file system. If the access point file system or a file
segment becomes corrupt, use this command to reset it.
Syntax:
FI ( s )
where s is the optional number of the segment to be reinitialized.
8-10
, from a location
f
is the program name.
is the optional segment location of the program.
.
s
instead
ALL