Intermec MobileLAN 21 Series System Manual page 225

TFTP SERVER START
Purpose: Use this command to enable the access point to act as a server. You can enable one
access point to act as a TFTP server and download files to additional access points.
Syntax:
TFTP SERVER START
After you issue this command, the access point responds to TFTP client requests that
are directed to its IP address. When acting as a server, the access point supports up to
four concurrent TFTP sessions.
TFTP SERVER STOP
Purpose: When you are done transferring files, you can stop the access point from being a TFTP
server by using this command.
Syntax:
TFTP SERVER STOP
After you issue this command, the access point no longer responds to TFTP client
requests; however, current TFTP sessions with the server are allowed to complete.
The following table lists error messages that can be issued from the TFTP server. These
messages are sent to the client and are meant to be read from the client perspective.
Error Message
TFTP server only
supports octet
mode
Unable to open
remote file
Can't read remote
file
Can't write remote
file
TFTP opcode not
read or write
request
Invalid opcode
during read
Invalid opcode
during write
Additional Access Point Features
Explanation
The client is attempting to transfer a file in ASCII mode. The access
point TFTP server only supports octet mode, which includes binary and
image.
The TFTP server cannot open the file that is named in the read or write
request. If you are trying to read a file, the file may not exist. If you are
trying to write a file, the file may be too big, the file may not have a
access point file header, or the file name may be incorrectly formed.
The server returns this message if the access point file system returns an
error while the server is attempting to read the file. This message is
unlikely to occur.
The server returns this message if the access point file system returns an
error while the server is attempting to write the file. This message is
unlikely to occur.
This error should not occur under normal operating conditions. This error
indicates that the TFTP client does not conform to the protocol.
This error should not occur under normal operating conditions. This error
indicates that the TFTP client does not conform to the protocol.
This error should not occur under normal operating conditions. This error
indicates that the TFTP client does not conform to the protocol.
8
8-17