Connecting To Your Fiber Optic Network; Connecting To An Mt-Rj Network - Intermec MobileLAN 21 Series System Manual

Connecting to Your Fiber Optic Network

You can order your 2101 or 2100 access points with a fiber optic option. To connect the
access point with the fiber optic option to your fiber optic network, you must have a
patch cord and an adapter. Patch cords and adapters are available from many different
manufacturers. Using adapters and patch cords, you can connect your access point to
•
•
•
For help choosing the proper cord and adapter, contact your local Intermec
representative
Note: All cables must be multimode, 62.5/125 µm.

Connecting to an MT-RJ Network

To connect to an MT-RJ network, you need
•
•
To connect to an MT-RJ network
1. Remove any cable protectors attached to the patch cord and adapter.
2. Connect the access point to your network.
To
access
point
an MT-RJ network.
a square connector (SC) network.
a straight tip (ST) network.
a patch cord for connecting the MT-RJ transceiver to the MT-RJ adapter.
an adapter for connecting an MT-RJ cord to an MT-RJ network.
MT-RJ connector
Installing the 21XX
MT-RJ adapter
21XXU039.eps
2
To
MT-RJ
network
2-15