Intermec MobileLAN 21 Series System Manual page 202

MobileLAN access 21XX System Manual
5. Copy the data files to the inactive data segment.
6. Activate the inactive startup segment by typing
7. Activate the inactive data segment by typing
8. Type x to return to the access point prompt (ap>).
9. Type b and press Enter to reboot the access point.
You may need to reconfigure the access point for your installation.
To upgrade a 2106
1. Type
2. Copy the software files to the access point.
7-30
a. Type and press Enter. A series of Cs appears on your screen.
fx 3
b. As the Cs are appearing, send all the data files using YMODEM protocol to the
access point. A P appears when the transfer is complete.
For example, in the Filename field, click Browse and navigate to
DATA\ACT.DNL. To transfer all the data files at once, replace the specific
filename with an asterisk (*) so that instead of sending ACT.DNL you are
sending *.DNL. In the Protocol field, click the Protocol down arrow and choose
Ymodem. Click Send.
appears when the operation is complete.
when the operation is complete.
and press Enter to erase the files. A P appears when the segment is
fe
erased.
a. Type and press Enter. A series of Cs appears on your screen.
fx
b. As the Cs are appearing, send all the data files using YMODEM protocol to the
access point. A P appears when the transfer is complete.
For example, in the Filename field, click Browse and navigate to
SOFTWARE\ACT.DNL. To transfer all the data files at once, replace the
specific filename with an asterisk (*) so that instead of sending ACT.DNL you
are sending *.DNL. In the Protocol field, click the Protocol down arrow and
choose Ymodem. Click Send.
and press Enter. A 'P'
fb 2
and press Enter. A 'P' appears
fb 4