Intermec MobileLAN 21 Series System Manual page 74

MobileLAN access 21XX System Manual
To configure the Ethernet or fiber optic settings
1. From the menu, click Ethernet. The Ethernet screen appears.
2. If you have a fiber optic port, click the down arrow on the right side of the Port
3. Click the down arrow on the right side of the Link Speed field and choose the speed
4. Click the down arrow on the right side of the Link Status Check field and choose
5. Click down arrow on the right side of the Hello Period field and choose a hello
6. Click Submit Changes to save your changes. To activate your changes, from the
3-12
Type field and choose which port is connected to the Ethernet network.
and duplex mode you want this port to use to communicate with the Ethernet or
fiber optic network.
Enabled or Disabled.
period of 1, 2, or 3 seconds.
menu bar click Save/Discard Changes and then click Save Changes and Reboot. For
help, see "Saving Configuration Changes" in Chapter 1.