Table of Contents
Advertisement
FB Command (continued)
You can use an asterisk instead of a segment name if you want to leave that segment
unchanged. For example, to leave the active boot segment unchanged and make
segment 4 the active data segment, you could enter:
FB * 4
After loading software into the access point a common task is to activate the new
software. To activate the new software, enter:
FB IB: ID:
This command activates the inactive boot and data segments. You do not need to know
which of the boot and data segment numbers the flash is loaded into.
FC
Purpose:
Compacts the files in a particular segment.
Syntax:
FC s
where s is the name or number of the segment to be compacted. You can enter
instead of a segment name or number if you want to erase all segments.
Example:
To compact the contents of segment 1, enter:
FC 1
To compact the contents of the inactive boot segment, enter:
FC IB:
FD
Purpose:
Displays the flash file system directory, including information about the boot file.
Syntax:
FD
FDEL
Purpose:
Deletes a particular file from a segment.
Syntax:
FDEL f ( s )
where:
f
s
Example:
To delete the file UAP.PRG from the inactive boot segment, enter:
FDEL IB:UAP.PRG
is the name of the file to be deleted.
is the optional segment location of the file.
Additional Access Point Features
8
ALL
8-9
Advertisement
Table of Contents
Troubleshooting
