Parameter; Common To Preventive Maintenance Functions - Mitsubishi Electric CR800-D Series User Manual

13. Parameter

13.1 Common to preventive maintenance functions

Parameter
Pause method of PMSTPWAY
warning
occurrence
Preventive PMENA
maintenance
function
enable/disable
switching
Preventive MSPPMENA
maintenance
function
enable/disable
status
Parameter 114
Parameter Number of
name elements
Integer 1
Integer 1
Integer 1
Details explanation
Specify the pause method of warning occurrence
or warning signal output of the preventive
maintenance function.
Specify the behavior of the preventive
maintenance function when warning occurrence or
warning signal output is paused.
1: Pause until maintenance (occurs only once
when power is input).
(Warning occurs or a warning signal is output
once immediately after power input and pause
continues after reset.)
2: Pause until maintenance (stops as well when
power is input)
Specify enable/disable of the preventive
maintenance function.
This parameter is used when a customer who
uses the "MELFA Smart Plus Card Pack" disables
the preventive maintenance function in order to
continue using the maintenance forecast.
You can check whether or not the preventive
maintenance function is enabled. (Read only)
1: Enable
0: Disable
Factory
setting
1
0