Navigating Configure Mode; Setting Configuration Options In Configure Mode; To Set Configuration Options In Configure Mode - HP P4535A - Web Cache Server Appliance Administrator's Manual

Chapter 10
The Configure mode command list appears (shown below).
If the command list does not display, enter ? at the prompt.

Navigating Configure mode

Configure mode in a Traffic Line interactive session consists of levels of commands. Each command has a
number associated with it. To execute a command, enter its number at the command prompt, then press Return.
You can enter (a question mark) at the prompt and press Return at any time to display a list of commands at
?
the current level.
To return to a previous command level, type
To exit a Traffic Line interactive session, type

Setting configuration options in Configure mode

To set configuration options in Configure mode:

1. Start Configure mode as described in
2. At the prompt, enter the number that corresponds to the type of configuration you want to change, then
press Return. For example, to change protocol configuration, enter 2 at the prompt.
Each command displays a sub level of commands that group specific configuration variables together. For
example, the
Protocols
, and
ftp nntp
3. To view a group of configuration options enter the number of the sub level command. Each configuration
option has a number associated with it.
4. To change a configuration option, enter the following command:
change no value
where is the number associated with the configuration option and
no
For example, to change the FTP inactivity timeout option to 200 seconds, go the
Protocols>ftp
with the FTP inactivity timeout configuration option.
For a detailed description of all the configuration options available in Traffic Line, refer to
page 182.
.
Starting Configure mode‚ on page
command (2) displays the following sub level of commands:
.
command level, then type
(a period) at the prompt and press Return.
at the prompt and press Return.
exit
value
at the prompt. 15 is the number associated
change 15 200
Configuring Traffic Server
76.
,
display http
is the value you want to set.
records.config‚ on
,
77