Teltonika FMB001 User Manual page 31

not generate IDD Prefix, which depends on location of phone). If no numbers are entered,
configuration and sending commands over SMS are allowed from all GSM numbers.
SMS data sending settings – enable or disable periodic data and event SMS usage. This
setting does not affect replies to SMS request messages – answers are always sent back to
sender telephone number.
Device will send periodical or event record via sms to server, when these conditions are
met:
1. Panic event is generated;
2. Modem ready and connected to operator;
3. GSM number, to which data will be sent, is configured in device;
4. Sms data sending is enabled;
5. no connection with server via GPRS;
6. Event record is not sleep event, when device goes to deep sleep.
Incoming call Settings
This parameter defines device's actions on incoming calls. Possible options:
Do Nothing – device will ignore incoming calls.
Hang-up – device hand up incoming calls.
Report position – device will send sms with it's GNSS position to caller number and hand up
the call.
Auto answer – device will answer the call with paired Hands Free device. No need to press
the button on.
Figure 12 SMS/Call configuration
31