Blue-Tooth - Teltonika FMB001 User Manual

5.13 Blue-tooth

BT Radio determines state determines Blue-tooth status, possible values:
a) Disable – Blue-tooth is off;
b) Enable (hidden) – Blue-tooth is on, device automatically connects to defined MAC, but
is invisible for external devices which want to pair with it.
c) Enable (visible) – Blue-tooth is on and visible for external devices.
Local name can be set according to your needs. If this field is empty, name will be
automatically generated:
FMB001_<imei last chars>
Local PIN - PIN code which will be used when external device will try to pair with FMB001.
NOTE: FMB001 supports ONE connection at a time.
NOTE: FMB001 can see up to 10 available devices. If there are more then 10, with each
scanning the list may change.
Security mode possible options:
a) PIN only – only pin is used when external device tries to connect to FMB001.
b) PIN+MAC list – PIN is used, also external device's MAC address needs to be in
Authorized MAC list
c) MAC list only – connection to FMB001 is possible only if external device MAC is in
Authorized MAC list.
d) None – no security enabled.
General
Figure 24 General Blue-tooth settings
Auto Connect to External Device
47