Gsm Settings, Gprs Part - Teltonika FMB001 User Manual

In GNSS source Settings user can configure which GNSS system or systems to use.
User has choice to use only one system of GPS, Glonass, Galileo or Beidou. Also it is able to
choose two or three systems together. One exception is that you can not combine Beidou and
Glonass systems together.
List of configurable GNSS sources:
Beidou only
Glonass only
Galileo only
Galileo+Beidou
Galileo+Glonass
Gps only
Gps+Beidou
Gos+Glonass
Gps+Galileo
Gps+Galileo+Beidou
Gps+Galileo+Glonass
List of NON–configurable GNSS sources:
Glonass+Beidou
Galileo+Glonass+Beidou
Gps+Glonass+Beidou
GPS+Galileo+Glonass+Beidou
5.5

GSM settings, GPRS part

'GPRS' defines main parameters for FMB001: GSM operator APN and GPRS username and
password (optional – depending on operator), destination server IP and port, and allows to set
protocol used for data transfers – TCP or UDP. Also all server setting and backup server mode can
be selected for backup server configuration.
Backup server has 3 different modes:
▪ Disable: backup server is not used.
▪ Backup: send to backup server if main server not available (Failed to open Link) or,
main server response timeout is detected 5 times in row.
▪ Duplicate: send records to both servers (main and backup), delete record from sd
card (or RAMS) only if both servers accepted records.
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these
is used, APN should be entered as 'chap:
'internet' with CHAP authentication, it should be entered as 'chap:
about APN and authentication type should be provided by your GSM operator.
Records settings. Here user can modify if FMB001 device will send newest records first,
meaning, that the most important thing is to know recent position of car, older records are being
sent right after newest records arrive to AVL application.
Activate Data Link Timeout is used to set timeout of link between FMB001 and AVL
application termination. If FMB001 has already sent all records it waits for new records before
closing link (except Deep Sleep mode, more information in Deep Sleep mode chapter). If new
ID:01
ID:02
ID:04
ID:05
ID:06 Example of a good configuration
ID:08
ID:09
ID:10
ID:12
ID:13
ID:14
Example of a bad configuration
<APN> ' or 'pap: <APN> '. I.e. if operator is using APN
internet
'. Information
29