Device's Log Using Your Mobile Phone - Teltonika FMB001 User Manual

adapter identification in network you could enter a full device name. You could check
your Hands Free adapter Blue-tooth name by scanning nearby Blue-tooth devices
using mobile phone or computer with Blue-tooth adapter.
9. Go to "SMS \ Call Settings" in left menu and set "Incomming Call Action" to "Do
Nothing" visible at Figure 3.
10. After all these steps press „Save to device" to save configuration (Figure 2.9).
11. Now you can disconnect FMB device from a PC or stay connected if you want to make
further changes to configuration.
Connecting Blue-tooth Hands Free adapter
After this configuration you could connect your Hands Free device to FMB device. Turn on
Hands Free device then turn on its Blue-tooth connection for pairing following your model
4
instructions . Hands Free adapter should make a special sound in ear from speaker or its led
identification should change to inform about successful connection
successfully connected, call to FMB device, Hands Free device should start ringing. If you later
restart FMB device it will automatically connect to this adapter.

5.13.3 Device's log using your mobile phone.

When FMB device starts, automatically Blue-tooth is ON too. Take your mobile phone, go
to settings>Blue-tooth and turn it on. Scan for near a by devices, find you device in list,
distinguish device by last IMEI numbers on device module. Press pair, wait until device will ask to
enter pairing password, type: 5555. Paired device will show up in paired device list. Now
download from play store/app store terminal for Blue-tooth. E.g BlueTerm. Run app, click
find>connect to your paired device. Now we need to send command to FMB001 through Blue-
tooth terminal, type: .log:1
4
Hands Free device Blue-tooth connection pairing instructions depends on specific model.
5
Hands Free device notification about paired Blue-tooth connection depends on specific model.
Figure 3. Incomming Call Action settings.
5
. To check if adapter is
50