Teltonika FMB001 User Manual page 59

Table 6 Permanent I/O elements
Permanent I/O elements
(are always sent to server if enabled)
Nr. Property Name
1 Ignition
2 Movement
3 Data mode
4 GSM signal
5 Sleep mode
6 GNSS Status
7 GNSS PDOP
8 GNSS HDOP
9 External Voltage
10 Speed
11 GSM Cell ID
12 GSM Area Code
13 Battery Voltage
14 Battery Current
15 Active GSM operator
16 Trip odometer
17 Total odometer
18 Digital Input 1
19 Fuel Used GPS
20 Fuel Rate GPS
21 Axis X
22 Axis Y
23 Axis Z
24 ICCID
25 SD status
26 Eco Score
27
User ID
28
BLE Temp #1
Description
Logic: 0 / 1
Logic: 0 / 1
0 – home on stop, 1 – home on move, 2 –
roaming on stop, 3 – roaming on move, 4 –
unknown on stop, 5 – unknown on move
GSM signal level value in scale 1 – 5
Logic: 0 / 1
States: 0 – short circ., 1 – connected.
Parameter defines if GPS antenna is short circuit.
All the time value will be sent 1. The only
condition to get value 0, then antenna is
damaged and short circuit.
Probability * 10; 0-500
Probability * 10; 0-500
Voltage: mV, 0 – 30 V
Value in km/h, 0 – xxx km/h
GSM base station ID
Location Area code (LAC), it depends on GSM
operator. It provides unique number which
assigned to a set of base GSM stations. Max
value: 65536
Shows battery Voltage in mV
Shows battery Current in mA
Currently used GSM Operator code
Distance between two records: m
Total odometer count: m
Logic: 0 / 1
Fuel used (ml) by GPS
Fuel Consumption by average speed (l/h)
Accelerometer axis x value
Accelerometer axis y value
Accelerometer axis z value
Sim Card's ICCID
Logic: 0 – not present, 1 – present
Average amount of events on some distance
MAC address of NMEA receiver device connected
via Blue-tooth
Degrees ( °C ), -40 - +125; Error codes:
4000 - abnormal sensor state
3000 - sensor not found
2000 - failed sensor data parsing
59