4.5.2 Towing Detection
Towing detection scenario helps to inform driver about car deporting. FMB001 generates
event when car is being towed or raised, for example in case of vehicle evacuation.
FMB001 activates towing function when these conditions are met:
•
Ignition (configured Ignition Source) is OFF
•
Activation Timeout (set in Towing detection features) is reached
When Activation Timeout is reached and Ignition is still in OFF state, FMB001 monitors
accelerometer data. If Acceleration or Angle value reaches configured threshold for configured
Duration (in ms), check Ignition state. If Ignition is still OFF during configured "Ignition check after
Event Timeout" time, then event is generated. If configured - sends sms event or makes a call.
Function will be reactivated after FMB001 again detects change of Ignition state from ON
to OFF.
4.5.3 Unplug Detection
Unplug detection Scenario generates event or makes a call when FMB001 is unplugged from OBD
socket.
4.5.4 Crash Detection
If Crash detection is enabled, it monitors acceleration on each axis, if acceleration exceeds
configured value for longer then configured duration, event with value "1" is generated.
4.5.4.1
Crash Trace operation
If trace is enabled FMB will collect acceleration data every 40 msec.
4.6
Blue-tooth
Blue-tooth can work in two modes - slave or master.
While working as master mode - Blue-tooth can connect to defined "hand free" or "OBDII"
system.
While working as slave mode - Blue-tooth can accept incoming connection from external
device.
5
CONFIGURATION
5.1
Configurator
New FMB001 module has default factory settings. Settings should be changed according to
your application and your GSM operator information.
FMB001 configuration may be performed via SMS commands or configurator.
FMB001 has one user editable profile.
It can be configured to acquire and send data to server. If device is not able to send data to
server, GSM is not available FMB001 will start storing records to flash memory. It is possible to
store up to 1 056 512 data records with 128mb internal flash memory. It will send data later
when GPRS is available again. Note that FMB001 can have memory full of records. In such case it
22