Roaming Network Gsm Operator Code "Vehicle Moving" Parameters; Min Period (Id=10150); Min Distance (Id=10151); Min Angle (Id=10152) - Teltonika FMB001 User Manual

6.6.4 Roaming Network GSM operator code "Vehicle MOVING" parameters

6.6.4.1
This parameter indicates time interval in seconds in order to acquire new record. If value is
0 it means no records by min period will be saved.
Minimum Maximum
value value
0 2592000
6.6.4.2
This parameter indicates distance in meters in order to acquire new record. Record is
stored when the distance between previous records is greater than parameter's value. If value is
0 it means no records by min distance will be saved.
Minimum Maximum
value value
0 65535
6.6.4.3
This parameter indicates angle in degrees in order to acquire new record. If angle
difference between last recorded coordinate and current position is greater than defined value,
new record is stored. This parameter is operational, when speed is higher than 10km/h. If value
is 0 it means no records by min angle will be saved.
Minimum Maximum
value value
0 180
6.6.4.4
This parameter indicates speed difference in order to acquire new record. If speed
difference between last recorded coordinate and current position is greater than defined value,
new record is stored. If value is 0 it means no records by min distance will be saved.
Minimum Maximum
value value
0 255
6.6.4.5
This parameter defines minimum number of records in one data packet that can be sent to
server. It has higher priority than Data Send Period (ID=10155).
Minimum Maximum
value value

Min Period (ID=10150)

Recommended
value
-

Min Distance (ID=10151)

Min Distance (ID=10151)
Recommended Goes with (depends on)
value
-

Min Angle (ID=10152)

Recommended Goes with (depends on)
value
-

Min Speed (ID=10153)

Recommended Goes with (depends on)
value
Min Distance (ID=10151)
10

Min Saved Records (ID=10154)

Recommended Goes with (depends on)
value
Goes with (depends on)
parameters
Min Angle (ID=10152)
parameters
Min Period (ID=10150)
Min Angle (ID=10152)
parameters
Min Period (ID=10150)
parameters
Min Period (ID=10150)
Min Angle (ID=10152)
parameters
Value
type
U32
Value
type
U32
Value
type
U16
Value
type
U16
Value
type
76