Countrecs; Towingreact; Faultcodes; Obdinfo - Teltonika FMB001 User Manual

Gnss/gsm terminal, internal li-ion battery 3.7v, 170mah
Hide thumbs Also See for FMB001:
Table of Contents

Advertisement

# records found on FLASH
Minimum Records to Send: #
GPRS Enabled: #
Time Sync: #
Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1.
GPRS Enabled: 1. Time Sync: 1.

6.1.10 countrecs

Returns the number of records save in the Micro SD card or internal flash.

6.1.11 towingreact

Reactivates Towing Detection to initial state (does not wait for ignition to be OFF). Useful
when generated false Towing event and needs reactivation.

6.1.12 faultcodes

Response details
LIST
Example: "P0100,P0200,P0300,C0300,B0200,U0100".

6.1.13 obdinfo

Response details
LIST of OBD info
Example:Protocol:5,VIN:N/A,TM:5,CNT:5,ST:OBDDATA
EQUESTING,P1:0x0,P2:0x0,P3:0x0,P4:0x0,MIL:0,DTC:0,ID0

6.1.14 btgetlist

btgetlist
command
btgetlist 0; device will respond with BT_LIST_Discovered
btgetlist 1; device will respond with all paired devices
btgetlist 2; device will respond with connected blutetooth device
Note:
Without
In FW 01.00.23 btgetlist (without args) will not respond (as unknown command)
Description
Returns list of fault codes; response when no faults: "No fault
codes detected."
Description
Protocol, VIN, AdaptiveTiming value, requested PID counter, OBD
application state, available vehicle PIDs, mil status, number of
DTCs
needs
argument
argument
it
Number of records found on FLASH
Number of minimum saved records to send
State of the GPRS connection, 0 – disabled; 1 –
enabled
Indicates time synchronization on the device, 0
– not
synchronized; 1 – synchronized
what
list
is
always
0
i.e
should
be
printed!
BT_LIST_Discovered
65

Advertisement

Table of Contents
loading

Table of Contents