Select File - Panasonic VL-W1 Series Setup And Maintenance Manual

4-6-6 Select file

SELECT 0-2 IN
(No.20-22)
D0 - D10 IN (No.3-13)
SET IN (No.2)
TRIGGER IN (X6)
READY OUT (Y6)
LASING OUT (Y7)
LASING END OUT
(Y8)
SET OK OUT (No.36)
Item Time
T1 0.5 ms or more
T2 0 ms or more
T3 20 to 510 ms
T4 ―
T5 10 ms or more
T6 0 ms or more
*1 : Turn off SELECT 0 IN to SELECT 2 IN (No.20-22) when you specify a file number.
*2 : You can input the next file number during the lasing operation. If the lasing operation was being executed when you
turned on SET IN (No.2), the file number changes after the lasing operation completes.
ON
*1
OFF
ON
File
number A
OFF
ON
T1
OFF
T2
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
T3
OFF
Remarks
After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN
to D10 IN, turn on SET IN (No.2).
Keep the input until SET OK OUT (No.36) turns on.
One-shot output. Set the output time on the environment setting screen. There is a small
margin of error for the setting value.
Setup time of the laser processing machine to start the lasing operation.
• In the laser pumping completed state: Time for data creation. It varies depending on
the quantity of the setting data.
• When the laser pumping is not completed: Time for data creation or time for laser
pumping, whichever is longer.
Keep the ON status for 10 ms or more.
To input the next file number right after TRIGGER IN (X6), input SET IN (No.2) after
LASING OUT (Y7) turns ON.
File number A
T4
ready
ME-VLW1-SM-8
File
number B
T6
T1
*2
T2
T5
T4
File
number A
T3
T3
File number B
ready
117