Select File - Panasonic LP-M Series Maintenance Manual

3-5-5 Select file

ON
SELECT 0 to 2
IN
OFF
ON
D0 to D15 IN
OFF
ON
SET IN
OFF
ON
TRIG. IN
OFF
ON
READY OUT
OFF
ON
MARKING OUT
OFF
ON
SET OK OUT
OFF
Item Period
T1 0.5 ms or more
T2 0 ms or more
T3 2 to 510 ms
T4 ―
T5 0 ms or more
T6 10 ms or more
Input SELECT 0 to 2 as the table below.
Number input target
File No.
• If marking is still being performed at the time SET input is turned to ON, the file will be changed after marking is
completed.
• TRIG. IN is acceptable while the READY is turned to ON.
102
T1
T2
T4
T3
Remarks
After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN
to D15 IN, turn on SET IN.
Keep the input until the SET OK turns ON.
One-shot output. Set the output time on the environment setting screen. There is a
margin for the setting value.
• When laser pumping is completed:
Time for data creation. It varies depending on the quantity of data to be marked.
• When laser pumping is not completed:
Time for data creation or time for laser pumping, whichever is longer.
To input the next file number right after TRIGGER IN, input SET IN after MARKING OUT
turns ON.
Keep the ON status for 10 ms or more.
SELECT 0 (No. 20)
OFF
T1
SELECT 1 (No. 21)
OFF
ME-LPM-SSM-10
T5
T6
T2
T4
SELECT 2 (No. 22)
OFF