3-2 Mark 2D code
The procedures to set a QR Code are given below.
Example
Module width
Setting procedures
1.
In the "Marking settings" screen, select "2D code" > "QR Code" in the ribbon.
The "Code data" dialog opens.
2.
Input the characters that you
want to encode. In this example,
"ABCDEFGHIJKLMN12345" is entered.
Select "OK" to close the dialog and return
to the "Marking settings" screen.
Item
Code type
Code data
Error correction level
Module height
Module height
Module width
Human readable text
ME-NAVIS2-QR-1
Setting
QR Code, Model 2
ABCDEFGHIJKLMN12345
M
0.500 mm
0.500 mm
Disabled
41