Stopping Port Monitoring - 3Com SUPERSTACK 2200 User Manual

9-6 C 9: S
HAPTER ETTING
Stopping Port
Monitoring
Top-Level Menu
system
display
ethernet
add
fddi
remove
bridge
start
ip
stop
snmp
analyzer
script
logout
U S R
P THE YSTEM FOR OVING
You are then prompted for an FDDI port through which the data should be
forwarded, as shown below:
Select FDDI port (1-2):
Once you successfully configure a port to monitor, all the data received and
transmitted on the port is forwarded to the selected analyzer port, as well
as processed normally.
After analyzing an Ethernet port, you can remove it from the roving analysis
configuration.
To remove a port configured for monitoring:
1 From the top level of the Administration Console, enter:
analyzer stop
2 Press Return to select Ethernet as the port type.
3 Enter the number of the Ethernet port currently being monitored.
Port data is no longer copied and forwarded from that port to the selected
analyzer port.
A
NALYSIS
2