Table of Contents
Advertisement
3-18
C
3: C
HAPTER
ONFIGURING
Address Error
Top-Level Menu
system
ethernet
display
fddi
community
display
bridge
trap
addModify
ip
remove
snmp
flush
analyzer
smtProxyTraps
script
logout
M
A
ANAGEMENT
CCESS TO THE
3 Enter the trap number(s).
Separate a series of more than two trap numbers with a hyphen (-) and
nonsequential trap numbers by commas. Enter
the traps for the destination.
The trap numbers you enter allow the trap specified by that number to be
sent to the destination address when the corresponding event occurs. No
unlisted traps are transmitted.
This example shows a trap configuration:
Enter the trap destination address:
Enter the trap numbers to enable (1-5,10,12-22|all)
[1-5,10,12-22]:
If the destination address you entered is not a valid end-station or if the
agent does not have a route to the destination, you receive this message:
Trap address invalid or unreachable
If you see this message, confirm the address of the end-station and confirm
that it is online.
Removing Trap Destinations
When you remove a destination, no SNMP traps will be reported to that
destination.
To remove a destination:
1 From the top level of the Administration Console, enter:
snmp trap remove
You are prompted for a trap destination address, that is, the IP address of
the SNMP manager that will no longer receive the traps.
2 Enter the SNMP trap reporting destination address you want to remove.
The destination address is removed and you return to the previous menu.
S
YSTEM
all
if you want to enable all
all
158.101.222.3
Advertisement
Chapters
Table of Contents
