Port Monitoring Display Keys; Logging - 3Com 9100 User Manual

Port Monitoring
Display Keys

Logging

Receive Alignment Errors (RX Align) — The total number of frames
received by the port that occurs if a frame has a CRC error and does
not contain an integral number of octets.
Receive Frames Lost (RX Lost) — The total number of frames
received by the port that were lost because of buffer overflow in the
switch.
Table 31 describes the keys used to control the displays that appear when
you issue any of the
Table 31 Port Monitoring Display Keys
Key(s) Description
[Esc] or [Return] Exits from the screen.
0 Clears all counters.
[Space] Cycles through the following screens:
Available using the show port
utilization command only.
The switch log tracks all configuration and fault information pertaining to
the device. Each entry in the log contains the following information:
Timestamp — The timestamp records the month and day of the
event, along with the time (hours, minutes, and seconds) in the form
HH:MM:SS. If the event was caused by a user, the user name is also
provided.
Fault level — Table 32
the system can assign to a fault.

Port Monitoring Display Keys

commands.
show port
Packets per second
Bytes per second
Percentage of bandwidth
describes the three levels of importance that
115