Enabling Timeout Of Remote Sessions - 3Com SUPERSTACK 2200 User Manual

2-12 C 2: H
HAPTER OW TO
Top-Level Menu
system
display
ethernet
softwareUpdate
bridge
baseline
ip
consoleSpeed
snmp
telnet
analyzer
password
script
name
logout
time
screenHeight
consoleLock
ctlKeys
nvData
reboot
Enabling Timeout
of Remote Sessions
Top-Level Menu
system
display
ethernet
softwareUpdate
bridge
baseline
ip
consoleSpeed
snmp
telnet
analyzer
password
script
timeOut
name
logout
interval
time
screenHeight
consoleLock
ctlKeys
nvData
reboot
U A
SE THE DMINISTRATION
To ensure that your Administration Console session will not be pre-empted
by remote access, you can lock the Administration Console. Remote access
is prohibited only for that particular session.
The Administration Console is always locked when you are in the middle of a
command. For example, the Administration Console is locked during a
software update.
To lock the Administration Console:
1 From the top level of the Administration Console, enter:
system consoleLock
You are prompted to unlock (off ) or lock (on) the Administration Console as
shown here:
Enter new value (off,on) [on]:
2 Enter to unlock the Administration Console or
off
You can configure the Switch 2200 to disconnect remote sessions after a
user-specified time interval of no activity. By default, the telnet timeout is
disabled.
To enable or disable the telnet timeout:
1 From the top level of the Administration Console, enter:
system telnet timeOut
2 Enter the telnet timeout state (
The default time interval is 30 minutes. To change this value, follow the
instructions in the next section.
C
ONSOLE
or ).
off on
to lock it.
on