3Com SUPERSTACK 2200 User Manual page 160

Top-Level Menu
system
list
display
ethernet
display
ipFragmentation
fddi
create
ipxSnapTranslation
bridge
delete
addressThreshold
ip
edit
agingTime
snmp
load
stpState
analyzer
assign
stpPriority
script
unassign
stpMaxAge
logout
addressGroup
stpHelloTime
portGroup
stpForwardDelay
stpGroupAddress
port
packetFilter
it meets the forwarding criteria. A packet that does not meet the forwarding
criteria defined in the filter is discarded.
To assign a packet filter:
1 From the top level of the Administration Console, enter:
bridge packetFilter assign
2 Enter the id number of the packet filter to be assigned. To get the id of the
packet filter, you can list all packet filters as described in "Listing Packet
Filters" on page 12-2.
3 Enter the port type (
4 Enter the port(s) to assign the filter.
5 Enter the path(s) you want to place the filter (
In this example, the assignment is to the transmit all (txA) path and the
receive all (rxA) path on port 1.
Select filter [1-n]:
Select port type(s) (Ethernet,FDDI|all) [Ethernet,FDDI]:
FDDI
Select port(s) (1-16|all) [1-16]:
Select path(s) (txA,txM,rxA,rxM|all):
The ports are limited to those that have at least one path unassigned, while
the paths are limited to those that are unassigned. Because you can specify
multiple selections at each level, you can assign a wildcard that attempts
to assign the filter to the set indicated by the ports and paths taken in
combination.
One or more assignments might fail because of a previous assignment.
Assigning Packet Filters to Ports
, ,
Ethernet FDDI all
1
).
, , ,
txA txM rxA rxM
1
txA,rxA
12-23
, ).
all