Setting The Port Paths - 3Com SUPERSTACK 2200 User Manual

Setting the
Port Paths
Top-Level Menu
system
ethernet
station
fddi display
path
bridge lerAlarm
mac
lerCutoff
ip
port
snmp label
analyzer
path
script
logout
In the Switch 2200 you can assign the A and B ports to either the primary or
the secondary path.
To assign ports to paths:
1 From the top level of the Administration Console, enter:
fddi port path
You are prompted for a port.
2 Enter the port(s) you want to configure.
3 Select the DAS configuration
4 Select the DAS configuration
at the prompt.
Administering FDDI Ports
or for peer mode at the prompt.
isol thru
, , or
isol wrap AB dualHome
8-23
for tree mode