Unassigning Packet Filters From Ports - 3Com SUPERSTACK 2200 User Manual

12-24 C 12: C
HAPTER
Unassigning
Packet Filters
from Ports
Top-Level Menu
system
list
display
ethernet
display
ipFragmentation
fddi
create
ipxSnapTranslation
bridge
delete
addressThreshold
ip
edit
agingTime
snmp
load
stpState
analyzer
assign
stpPriority
script
unassign
stpMaxAge
logout
addressGroup
stpHelloTime
portGroup
stpForwardDelay
stpGroupAddress
port
packetFilter
U P
REATING AND SING ACKET
To unassign a packet filter from one or more ports, the packet filter must
have been previously assigned to at least one port.
To unassign a packet filter:
1 From the top level of the Administration Console, enter:
bridge packetFilter unassign
2 Enter the id number of the packet filter to unassign.
3 Enter the port type (
4 Enter the port number(s) of the packet filter to unassign.
5 Enter the path(s) of the packet filter to unassign.
An example of unassigning a packet filter is shown next. In this example,
the unassignment is from the transmit all (txA) paths on port 1.
Select filter [1-n]:
Select port type(s) (Ethernet,FDDI|all) [Ethernet,FDDI]:
Select port(s) (1-16|all) [1-16]:
Select path(s) (txA,txM,rxA,rxM|all) [txA,rxA]:
Because you can specify multiple selections at each level, you can assign a
wildcard that attempts to unassign the filter from the set indicated by the
ports and paths taken in combination.
One or more of the unassignments might fail if the filter is not assigned.
F
ILTERS
, ,
Ethernet FDDI all
1
).
1
txA
FDDI