Resetting Nv Data To Defaults - 3Com SUPERSTACK 2200 User Manual

6-6 C 6: S
HAPTER AVING
Resetting NV
Data to Defaults
Top-Level Menu
system
display
ethernet
save
softwareUpdate
fddi
restore
baseline
bridge
examine
consoleSpeed
ip
reset
telnet
snmp
password
analyzer
name
script
time
logout
screenHeight
consoleLock
ctlKeys
nvData
reboot
, R , R
ESTORING AND ESETTING
At times you may not want to restore the system NV data. Instead, you may
want to reset the values to the factory defaults so that you can start
configuring the system from the original settings.
CAUTION: Resetting the NV data means that all NV memory is set back to
the factory defaults. Before proceeding, ensure that you want to reset your
NV data.
To reset all the NV data on the system to the original default values:
1 From the top level of the Administration Console, enter:
system nvData reset
You see the following prompt:
Resetting nonvolatile data may leave the system in an
inconsistent state and therefore a reboot is necessary
after each reset.
Do you wish to continue (n,y) [y]:
2 Confirm that you want to reset NV data by entering
you enter (yes) the system will reboot. If you enter
y
returned to the previous menu.
3 Reboot the system.
N D
ONVOLATILE ATA
(yes) at the prompt. If
y
(no), you are
n