Deleting Groups - 3Com SUPERSTACK 2200 User Manual

13-6 C 13: C
HAPTER
Port group example

Deleting Groups

Top-Level Menu
system
display
ethernet
list
ipFragmentation
fddi
display
ipxSnapTranslation
bridge
create
addressThreshold
ip
delete
agingTime
snmp
edit
stpState
analyzer
load
stpPriority
script
assign
stpMaxAge
logout
unassign
stpHelloTime
addressGroup
stpForwardDelay
portGroup
stpGroupAddress
port
packetFilter
A
ONFIGURING DDRESS AND
In this example, a new port group is created and loaded on the system. The
bit in the port group mask for the group is 12 and the name of the group is
Education. One port is entered and assigned to the group.
Select a bit in the port group mask [3-8, 14-32]:
Enter the port group name:
Enter the ports for the group - type q to return to the menu:
Port: Ethernet 2
q
Port:
Port Group 6 - Education - has been loaded
When you delete address or port groups from the system, those groups are
no longer available for use in packet filters.
If you want to use a group later but want to delete it now, first save it to an
ASCII file.
To delete an address or port group:
1 For address groups, enter the following command from the top level of the
Administration Console:
bridge packetFilter addressGroup
OR, for port groups, enter the following command:
bridge packetFilter portGroup
2 Enter this command:
delete
You are prompted for the ID of the address group or port group that you
want to delete.
3 Enter the ID number of the group you want to delete.
P G U P
ORT ROUPS TO SE IN
Education
F
ACKET ILTERS
12