3Com SUPERSTACK 2200 User Manual page 87

8-4 C 8: A
HAPTER DMINISTERING
Top-Level Menu
system
display
ethernet
station
connectPolicy
fddi
path
tNotify
bridge
mac
statusReporting
ip
port
snmp
analyzer
script
logout
FDDI R
ESOURCES
Table 8-2 Bit to Set for Rejecting a Station Connection (continued)
This Connection Is
Rejected...
(Switch port - Remote port)
B-B
B-S
B-M
M-A
M-B
M-S
M-M
To set the connection policies of an FDDI station:
1 From the top level of the Administration Console, enter:
fddi station connectPolicy
You are prompted for a station. The Switch 2200 has one station, which
appears in brackets.
2 Press Return.
3 Enter the value of the connection policy for that station.
The value is a 16-bit number with the appropriate bit(s) set for each
connection type that you want to reject.
Example:
Select station [1]:
Station 1 - Enter new value [8000]:
If This Bit
Is Set Connection Rules
5 Undesirable peer connection that creates
twisted primary and secondary rings; notify
SMT.
6 Undesirable peer connection that creates a
wrapped ring; notify SMT.
7 Tree connection with possible redundancy.
The node may not go to Thru state in CFM.
In a single MAC node, Port B has precedence
(with defaults) for connecting to a Port M.
12 Tree connection with possible redundancy
13 Tree connection with possible redundancy
14 Normal tree connection
15 Illegal connection that creates a tree of rings
topology