Adding New Addresses; Removing Addresses - 3Com SUPERSTACK 2200 User Manual

11-12 C 11: A
HAPTER
Adding New
Addresses
Top-Level Menu
system
display
ethernet
summary
ipFragmentation
fddi
list
detail
ipxSnapTranslation
bridge
multicastLimit add
addressThreshold
ip stpState remove
agingTime
snmp stpCost find
stpState
analyzer stpPriority flushAll
stpPriority
script flushDynamic
address
stpMaxAge
logout freeze
stpHelloTime
stpForwardDelay
stpGroupAddress
port
packetFilter
Removing
Addresses
Top-Level Menu
system
display
ethernet
summary
ipFragmentation
fddi
list
detail
ipxSnapTranslation
bridge
add
multicastLimit
addressThreshold
ip
remove
stpState
agingTime
snmp
stpCost find
stpState
analyzer
stpPriority flushAll
stpPriority
script
flushDynamic
address
stpMaxAge
logout
freeze
stpHelloTime
stpForwardDelay
stpGroupAddress
port
packetFilter
B P
DMINISTERING RIDGE ORTS
When you assign new MAC addresses to the selected ports, these addresses
are added as statically configured addresses. A statically configured address
is never aged and can never be learned on a different Ethernet port.
To add a MAC address:
1 From the top level of the Administration Console, enter:
bridge port address add
You are prompted for the port type.
2 Enter
Ethernet
You are prompted for the port number.
3 Enter the number of the port.
You are prompted for one or more addresses to add.
4 Add each MAC address, pressing [Return] after each entry.
When you finish adding addresses, enter
You can remove individual MAC addresses from selected ports.
To remove an address:
1 From the top level of the Administration Console, enter:
bridge port address remove
You are prompted for the port type.
2 Enter
Ethernet
You are prompted for the port number.
3 Enter the number of the port.
You are prompted for one or more addresses to remove.
4 Enter addresses to remove, pressing [Return] after each entry.
Once you have entered all of the addresses to be removed, enter
to the previous menu.
or .
FDDI
or .
FDDI
to return to the previous menu.
q
to return
q