Silca Unocode 399 Plus Operating Manual page 42

Unocode 399 PLUS
• Edit Data Card
This function is u sed to edit a card previo usly
created by CODEMAKER.
• Select the data card from the list and press F2.
• Follow the proce dure de scribed i n " Create a
new Data Card"
parameters.
ATTENTION: if error messages
"CODEMAKER messages", page 60.
• Delete Data Card
This function is used to el iminate a data card
previously created by CODEMAKER.
• Select the data card and press F3.
ATTENTION: when a card is deleted the number of
that card cannot be reused.
• Copy Data Card
This fun ction is used
previously created by CODEMAKER and edit its
parameters.
• Select the data card.
• Press F4 then F1.
• Press NTER.
• Enter a description of the data card.
• Follow the pr ocedure described in " Create a
new da ta ca rd" and edit the
parameters.
38
and edit the r
appear, see chap.5.11.4
to copy a da
E
Copyright S ilca 2010
equired
F2
F3
ta card
F1
required
Operating manual - English