Table of Contents
Advertisement
Configure Connect IT using the web user interface
Section
NetFlow probe
Device Health
intelliFlow
5. Click Save at the bottom of the screen to save the changes.
Configure the find me feature
You can configure the find me feature to cause an LED on the Connect IT to blink, which can help you
to identify a specific device.
1.
Log in to the Connect IT web UI.
2. In the left pane, click the Find Me button. When it is selected, the circle button is blue.
The
Status
both continuously flash once per second until the Find Me button is de-selected or the device is
rebooted.
3. Click the Find Me button again to turn off the feature.
Reboot from the web UI
You can choose to reboot the Connect IT immediately, or schedule a daily reboot.
Immediately reboot the Connect IT
From the System page in the web UI, you can reboot the Connect IT. The device is immediately
restarted.
Note
You can also choose to schedule a daily reboot. See
1.
Log in to the Connect IT web
2. Click System in the left pane.
3. In the Device Reboot section, click Reboot.
Schedule a reboot from the web UI
You can schedule the Connect IT to automatically reboot every day at a scheduled time.
Note
You can also choose to reboot the Connect IT immediately. See
IT.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
Digi Connect IT® 16/48 User Guide
Description
Probe network traffic on this device and export statistics
to NetFlow collectors.
Device Health is a system monitor that collects and stores
metrics over a period to time and reports them to Digi
Remote Manager.
Reserved for future use.
LED on the front of the Connect IT and the
UI.
UI.
Configure the find me feature
Status
LED on the back of the Connect IT
Schedule a reboot from the web
Immediately reboot the Connect
UI.
50
Advertisement
Table of Contents
