Table of Contents
Advertisement
Configure Connect IT using the web user interface
Delete the Connect IT configuration
From the System page in the web UI, you can remove the Connect IT configuration.
1.
Log in to the Connect IT web
2. Click System in the left pane.
3. Scroll to the Configuration Management section.
4. Click Erase Config to remove the configuration from the Connect IT.
Configure the firewall from the web UI
You can configure the firewall for the Connect IT.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Firewall section.
4. Each sub-section enables you to configure a firewall component. Expand the sub-section and
complete the fields in each of the sections. To display information about what you should enter
in each field, click the down arrow and then Help next to each field.
Section
Zones
Port forwarding
Packet filtering
Custom rules
Quality of Service
5. Click Save at the bottom of the screen to save the changes.
Configure services from the web UI
You can configure services for the Connect IT.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Services section.
Digi Connect IT® 16/48 User Guide
UI.
UI.
Description
Configure the groups of network interfaces that can be
referred to by packet filtering rules and access control
lists.
Configure a list of port forwarding rules. These rules allow
network connections to the Connect ITto be forwarded to
other servers by translating the destination address.
Configure a list of packet filtering rules. These rules define
whether to accept or reject network connections that are
forwarded through the Connect IT.
Configure a script that is run to install advanced firewall
rules beyond the scope or capabilities of the standard
Connect IT configuration.
Configure the quality of service, bandwith allocation,
traffic shaping, and traffic prioritizing features.
UI.
Configure the firewall from the web UI
48
Advertisement
Table of Contents
