View System Log Information - Digi Connect IT 16 User Manual

Configure Connect IT using the web user interface
5. In the Heartbeat interval field, enter the minimum time interval between sending heartbeat
status events. These events are only sent if no other events have been sent for this interval. If
this field is blank, heartbeat events are disabled.
6. Configure log messages for individual event categories.
a. Expand the Event categories section.
b. For each category that you want to configure, expand the section and complete the
7. Click Save at the bottom of the screen to save the changes.

View system log information

In the System Logs page in the web UI, you can view detailed debugging, warning, and critical
messages.
1. Log in to the Connect IT web
2. Click System Logs in the left pane.
3. From the drop-down list box at the top of the screen, select the type of messages you want to
view. By default, all messages are displayed.
Select All: All messages appear. This is the default.
n
Critical messages: Only critical messages appear. These display in red text.
n
Warning messages: Only warning messages appear. These display in blue text.
n
Info messages: Only informational messages appear. These display in black text.
n
Debug messages: Only debugging messages appear. These display in gray text.
n
Digi Connect IT® 16/48 User Guide
fields in each of the sections. To display information about what you should enter in
each field, click the down arrow and then Help next to each field
UI.
Configure and view events and logs in the web UI
55