Table of Contents
Advertisement
Configure Connect IT using Remote Manager
Field
Modem firmware update
Configuration check
6. Configure a custom script to be run during the specified maintenance window
a. Expand the Custom scripts section.
b. Click the plus sign icon to specify a script. The section expands.
c. Running a custom script is enabled by default. Verify that the Enable slider is blue.
d. Complete the fields in each of the sections. You can hover over a field name to
7. Click Apply at the top of the screen to save the changes.
Configure VPN using Remote Manager
Configure an IPsec tunnel for a VPN from Remote Manager
You can configure an IPsec tunnel for a VPN.
1.
Log into your Remote Manager
2.
Access the Remote Manager configuration
3. Click Config > VPN in the toolbar. The VPN page appears.
4. Expand the IPsec section.
5. Set the NAT keep alive time.
a. Expand the advanced section.
b. In the NAT keep alive time field, enter the length of time to keep NAT alive for
Digi Connect IT® 16/48 User Guide
display information about what you should enter in each field.
account.
IPSEC tunnels. the default is 40 seconds. The syntax for the entry is number
{w|d|h|m|s}.
Configure VPN using Remote Manager
Description
Select this option to enable the modem firmware
update to be scheduled to occur within the specified
maintenance window. The system looks for all available
firmware over the air and in flash memory to see if an
update is needed. If a newer firmware version is
available, the update will occur.
Select this option to enable the system to check if
configuration updates are scheduled to occur within the
specified maintenance window.
This check is in addition to the check defined in the
Central Management section.
page.
21
Advertisement
Table of Contents
