Digi Connect IT 16 User Manual page 20

Configure Connect IT using Remote Manager
5. Configure a system maintenance task.
a. Expand the System maintenance section.
b. Enter the field values:
Field
Start time
Duration window
Frequency
Digi Connect IT® 16/48 User Guide
Schedule system maintenance from Remote Manager
Description
The start time of the maintenance window. All enabled
maintenance tasks take place at any random time
within the time block specified in the Duration window
field.
If this field is empty, maintenance is not scheduled and
no maintenance tasks will run.
Syntax: HH:MM
If the duration in the Duration window field is set to 1
or more hours, the minutes field is truncated.
The window of time during which the maintenance tasks
are scheduled to run. The default values is 2 hours.
24 hours: If this option is selected, the start time
n
entered in the Start Time field becomes
obsolete, as a value of 24 hours means the
maintenance tasks are scheduled to run at any
time during a 24-hour time period.
Immediately: If this option is selected, all
n
maintenance processes will execute at the same
time. This could potentially be dangerous, as this
action may stress the system.
The frequency at which the modem firmware check and
update tasks will run. The default value is Daily.
Daily: The device runs the modem firmware
n
check and update once a day within the given
time window.
Weekly: The device runs the modem firmware
n
check and update any day within the given time
window only once during the week.
20