Configure Connect IT using the web user interface
5. Set the NAT keep alive time.
a. Expand the advanced section.
b. In the NAT keep alive time field, enter the length of time to keep NAT alive for
6. Create an IPsec tunnel.
a. Expand the Tunnels section.
b. In the Add IPsec tunnel field, enter a name for the tunnel.
c. Click Add.
d. The tunnel is enabled by default. Verify that the Enable option is selected.
e. Complete the fields in each of the sections. To display information about what you
7. Click Save at the bottom of the screen to save the changes.
Configure an OpenVPN server from the web UI
You can configure an OpenVPN server and define clients.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the VPN section.
4. Expand the OpenVPN section.
5. Define an OpenVPN server.
a. Expand the OpenVPN section.
b. Expand the Servers section.
c. In the Add OpenVPN server field, enter a name for the server.
d. Click Add.
e. The server is enabled by default. Verify that the Enable option is selected.
f. Complete the fields in each of the sections. To display information about what you
6. Define a client.
a. Expand the Clients section.
b. In the Add OpenVPN client field, enter a name for the client.
c. Click Add.
d. Verify that the Enable option is selected.
e. Verify that the Use .ovpn file option is selected.
f. Complete the fields in each of the sections. To display information about what you
7. Click Save at the bottom of the screen to save the changes.
Digi Connect IT® 16/48 User Guide
IPSEC tunnels. the default is 40 seconds. The syntax for the entry is number
{w|d|h|m|s}.
should enter in each field, click the down arrow and then Help next to each field.
UI.
should enter in each field, click the down arrow and then Help next to each field.
should enter in each field, click the down arrow and then Help next to each field.
Configure VPN from the web UI
46